Data wysylki: 2026-08-03

I WILL BUY OAK VENEER

I will buy oak veneer. Regular car purchases. Dimensions • 0.6 × 210 × 2210 mm Tolerances • Thickness: −0 / +0.05 mm • Width: −0 / +3 mm • Length: −0 / +5 mm Moisture control • MC 7 percent ± 1.0 percent Color requirements (very uniform light oak for premium, low-contrast parquet) • Only light oak veneer (predominance of light tones). • Uniform color: range from light brown to yellow-brown no “flames” (spots/wavy pattern), no strong contrasts between elements, no multicolor discoloration, no chemical stains. • Minimum 50 percent light tones in the batch natural color differences must be carefully sorted (light elements separated from darker ones). • Quarter cut and crown cut veneer. • No signs of heat treatment (darker fibers at the ends). • General: maximum color uniformity - high-contrast elements (brown, red, gray tones) are completely prohibited. Quality requirements • Both sides must be clean, smooth, with a surface free from defects. • Healthy, light (live) knots with a maximum diameter of 3 mm permissible, a maximum of 1 piece per sheet (only fine, natural character groups of needle-like knots not permitted). Prohibited: • Sapwood - absolutely none. • Any cracks or delamination: open, mesh, lateral, frontal, closed, diagonal at the edges. • High contrast or strong color differences (brown, red, gray shades). • Open fiber arrangement / visible porous surface. • Knots on the sides, ends, or exceeding permissible limits. • Mechanical defects: knife marks, grinding scratches, insect damage, bark growths. • Mold, rot, fungal discoloration, or any other discoloration/defects. We are an Estonian company, looking for a permanent supplier.

The term search: 14 dni

Correspondence in: angielski