Data wysylki: 2023-01-19

I AM LOOKING FOR REGULAR SUPPLIERS OF OAK FRIEZES

Looking for: Purchase of an oak slat frieze specification: Textured: 27 x 72 x 1600-3300mm Cut: 30 x 80 x-85 1650-3350mm Tolerances: Thickness - 0 +3mm Width - 0 +5mm Length - 0 +100mm Quality Cutting Board sawn from wet wood, full-length sharp edged, cut at right angles. Uniform thickness along the entire length without dimension waviness. General Condition Discoloration of any kind, deformation, rot, rotting, cracks, insect galleries, wanes, core, and mold are not allowed. The fronts of the boards are paraffinized. Acceptable defects: Healthy knots up to max. 30mm b o. Black knots up to max. 10mm b o Knots larger than 30mm allowed in the amount of 1-2 pcs m Knots may be present on the edges. Note: Large knots must not be closer than 30cm from the ends of the boards. In this case, the board must be cut to a shorter size. Stoppers with the size of acceptable knots are accepted. Healthy, non-discolored white exterior. allowed without restrictions. inner white not allowed. Humidity: fresh packing on pallets on spacers, each length length on a different package.

The term search: 7 dni

Correspondence in: polski