Data wysylki: 2023-08-25

I WILL COMMISSION THE PRODUCTION OF CHAIRS

I will commission the production of chairs. 3 types of chairs, i.e. side chair, bar chair and lounge chair. The situation is that the atlas has not yet been made, which needs to be made of plywood in two parts. inside and outside, where inside it should be connected with an ivory-colored plastic fastener (mush mush), because both parts will be dragged with fabric or leather and after pulling them, they will have to be fastened together. (according to the car cover principle) when we take off the total thickness of the seat is 37mm, but bearing in mind that padding and fabric or leather will be added, the total thickness of the detail must be around 24mm. means each part must be 12mm thick. Since the material will be pulled, the plywood does not necessarily have to be blue, it can also be beech or other woods. Attached are the drawings and a general 3D pdf file of the atlas. Because the client wants to work on the product and already has the month of May 2024 in which they will be presented at exhibitions. We need production price: Atlas bar chair, side chair and lounge chair. The price of the product is different for both sides of the pillow. It is suggested to submit separately: 1) Proposal for the price of metal parts 2) Proposal for the wooden part 3) Finish: 3.1 Natural leather 3.2 Leather 3.3 Fabric Materials: https: link to the file pliki_rozne 1951_zdjecia.jpg https: link to the file pliki_rozne 1952_zdjecia.jpg .

The term search: 14 dni

Correspondence in: angielski, litewski